RFID MPR Firmware Upgrade Quick Starts

• Download the firmware upgrade executable using the link below.
• Run the downloaded program, this will install the firmware upgrade application on your PC.
• Read the included help file. It has lots of good information.
• Set the COM Port to the serial port where the MPR resides.
• Select the correct operating mode by clicking the grey "Operating Mode" button. (Use "PCMCIA/PC Card" when the target MPR is installed in a PCMCIA slot, use "MIB/Serial" when the card is installed in an MIB1000 test board).
• Click the green "GO" button.
• Follow the instructions as prompted and wait for the process to complete.
• Repeat as needed.
• When finished, click the red "EXIT" button.

MPR Firmware Upgrade.exe